SANDFORCE DIDN’T HAVE any new products to show off at IDF, but there was a very cool new toy using their controller on display. It is called the SATADIMM, and it is an SSD in DIMM form factor.
All business in the front….
The idea behind Viking’s SATADIMM is simple, take an SSD and put it in the form factor of a DIMM. You don’t use any of the memory slot’s data connections, that would not work at all, you just pull power from the slot. From the front, it looks very much like an ordinary DIMM with 9 DRAM chips.
…..Party in the back!
If you look closely, you will see that it is not an ordinary DIMM. If you flip it over, it becomes blindingly obvious to even the most dense onlooker because DIMMs don’t have SATA connectors in the middle. Or Sandforce controllers. Or tons of passive components.
What you end up with is a 400GB SSD that slots into every extra DIMM slot that you have open. Anyone running 1U machines or blade servers likely has more RAM slots open than drive bays. You have to admit that the idea is quite compelling.S|A
Charlie Demerjian
Latest posts by Charlie Demerjian (see all)
- Qualcomm is planning a lot of Nuvia/X-Elite announcements - Mar 25, 2024
- Why is there an Altera FPGA on QTS Birch Stream boards? - Mar 12, 2024
- Doogee (Almost) makes the phone we always wanted - Mar 11, 2024
- Intel Birch Stream Boards Speak From The SIde - Mar 6, 2024
- QTS Shows Off Birch Stream boards at MWC - Mar 5, 2024